S30 Cutting Bar

Groundcare

The S30 cutting bar mounts on the side arms with the S30 quick attach system (both on the mechanical & hydraulic side arm). It cannot be mounted on the attachment coupling plate of the loader. S30 cutting bar is equipped with the same cutting blades and blade guides as the A35676 Cutting bar. The frame and actuator mechanism are however stronger, which means the S30 cutting bar is optimized for hedge cutting and doesn’t work too well with hay because of the higher frame. There are wear plates at each end of the cutting bar, useful when working on paved and asphalt surfaces for instance.

The mounting bracket of the cutting bar is pivoted and locked with a bolt and can be turned manually in different positions. This gives the possibility to for instance cut the hedge horizontally, vertically and in different angles. The cutting bar is also equipped with a pressure relief valve that protects the unit if it hits an obstacle.

Please note the S30 Cutting Bar may require the S30 Hydraulic Arm sold separately:S30 HYDRAULIC ARM

• Strong cutting bar for cutting hedges, bushes, etc.
• Can be mounted both on the A431070 mechanical and A424552 hydraulic side arm
• Same cutting blades and blade guides as on the A35676 Cutting bar
• Pressure relief valve protects the cutting bar in case of contact with an obstacle
• Wear plates at each end, e.g. for working on paved and asphalt surfaces